2" on 8" Pipe Saddle Template

Fishmouth cut for a 2" branch (OD 60.3 mm) on a 8" header (OD 219.1 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

4.2 mmSaddle depth · 3/16"
189.4 mmWrap length · 7 7/16"
11.8 mm16-point spacing · 7/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"4.2 mm3/16"
222.5°11.8 mm7/16"3.6 mm1/8"
345°23.7 mm15/16"2.1 mm1/16"
467.5°35.5 mm1 3/8"0.6 mm0"
590°47.4 mm1 7/8"0.0 mm0"
6112.5°59.2 mm2 5/16"0.6 mm0"
7135°71.0 mm2 13/16"2.1 mm1/16"
8157.5°82.9 mm3 1/4"3.6 mm1/8"
9180°94.7 mm3 3/4"4.2 mm3/16"
10202.5°106.6 mm4 3/16"3.6 mm1/8"
11225°118.4 mm4 11/16"2.1 mm1/16"
12247.5°130.2 mm5 1/8"0.6 mm0"
13270°142.1 mm5 9/16"0.0 mm0"
14292.5°153.9 mm6 1/16"0.6 mm0"
15315°165.8 mm6 1/2"2.1 mm1/16"
16337.5°177.6 mm7"3.6 mm1/8"
17360°189.4 mm7 7/16"4.2 mm3/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 8"

2" branch on other headers