Pick the header and branch pipe size, download a full-size PDF, wrap it around the branch pipe and cut along the line. Free, no sign-up.
Dashed boxes = printed pages. Keep the paper below the cut line; cut away the pipe above it.
Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height — in the free Android app, made by a working pipefitter.
Get it on Google Play →Sketch the ISO, get CL/CUT cut lengths, 2D offsets, parallel runs and elbow miter cuts — export PDF/DXF. Free Android app.
Get it on Google Play →Ready-made layout tables for common header × branch combinations. Each page links to the full-size PDF.
Outside diameter (OD) of both pipes, per ASME B36.10. The cut follows the outer surface, which is what you mark on site. For a full-penetration bevel, grind the inside afterwards.
No. For a 90° saddle the branch OD must be equal to or smaller than the header OD.
Yes — a straight dummy leg welded under a horizontal pipe uses exactly this saddle cut. The app also gives the long and short leg lengths from the pipe center height.