3/4" on 4" Pipe Saddle Template

Fishmouth cut for a 3/4" branch (OD 26.7 mm) on a 4" header (OD 114.3 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

1.6 mmSaddle depth · 1/16"
83.9 mmWrap length · 3 5/16"
5.2 mm16-point spacing · 3/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"1.6 mm1/16"
222.5°5.2 mm3/16"1.4 mm1/16"
345°10.5 mm7/16"0.8 mm1/16"
467.5°15.7 mm5/8"0.2 mm0"
590°21.0 mm13/16"0.0 mm0"
6112.5°26.2 mm1 1/16"0.2 mm0"
7135°31.5 mm1 1/4"0.8 mm1/16"
8157.5°36.7 mm1 7/16"1.4 mm1/16"
9180°41.9 mm1 5/8"1.6 mm1/16"
10202.5°47.2 mm1 7/8"1.4 mm1/16"
11225°52.4 mm2 1/16"0.8 mm1/16"
12247.5°57.7 mm2 1/4"0.2 mm0"
13270°62.9 mm2 1/2"0.0 mm0"
14292.5°68.2 mm2 11/16"0.2 mm0"
15315°73.4 mm2 7/8"0.8 mm1/16"
16337.5°78.6 mm3 1/8"1.4 mm1/16"
17360°83.9 mm3 5/16"1.6 mm1/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 4"

3/4" branch on other headers