3" on 4" Pipe Saddle Template

Fishmouth cut for a 3" branch (OD 88.9 mm) on a 4" header (OD 114.3 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

21.2 mmSaddle depth · 13/16"
279.3 mmWrap length · 11"
17.5 mm16-point spacing · 11/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"21.2 mm13/16"
222.5°17.5 mm11/16"18.6 mm3/4"
345°34.9 mm1 3/8"11.8 mm7/16"
467.5°52.4 mm2 1/16"3.8 mm1/8"
590°69.8 mm2 3/4"0.0 mm0"
6112.5°87.3 mm3 7/16"3.8 mm1/8"
7135°104.7 mm4 1/8"11.8 mm7/16"
8157.5°122.2 mm4 13/16"18.6 mm3/4"
9180°139.6 mm5 1/2"21.2 mm13/16"
10202.5°157.1 mm6 3/16"18.6 mm3/4"
11225°174.6 mm6 7/8"11.8 mm7/16"
12247.5°192.0 mm7 9/16"3.8 mm1/8"
13270°209.5 mm8 1/4"0.0 mm0"
14292.5°226.9 mm8 15/16"3.8 mm1/8"
15315°244.4 mm9 5/8"11.8 mm7/16"
16337.5°261.8 mm10 5/16"18.6 mm3/4"
17360°279.3 mm11"21.2 mm13/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 4"

3" branch on other headers