Fishmouth cut for a 3" branch (OD 88.9 mm) on a 24" header (OD 610.0 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.
Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).
| # | Angle | Around (mm) | Around (in) | Drop (mm) | Drop (in) |
|---|---|---|---|---|---|
| 1 | 0° | 0.0 mm | 0" | 3.3 mm | 1/8" |
| 2 | 22.5° | 17.5 mm | 11/16" | 2.8 mm | 1/8" |
| 3 | 45° | 34.9 mm | 1 3/8" | 1.6 mm | 1/16" |
| 4 | 67.5° | 52.4 mm | 2 1/16" | 0.5 mm | 0" |
| 5 | 90° | 69.8 mm | 2 3/4" | 0.0 mm | 0" |
| 6 | 112.5° | 87.3 mm | 3 7/16" | 0.5 mm | 0" |
| 7 | 135° | 104.7 mm | 4 1/8" | 1.6 mm | 1/16" |
| 8 | 157.5° | 122.2 mm | 4 13/16" | 2.8 mm | 1/8" |
| 9 | 180° | 139.6 mm | 5 1/2" | 3.3 mm | 1/8" |
| 10 | 202.5° | 157.1 mm | 6 3/16" | 2.8 mm | 1/8" |
| 11 | 225° | 174.6 mm | 6 7/8" | 1.6 mm | 1/16" |
| 12 | 247.5° | 192.0 mm | 7 9/16" | 0.5 mm | 0" |
| 13 | 270° | 209.5 mm | 8 1/4" | 0.0 mm | 0" |
| 14 | 292.5° | 226.9 mm | 8 15/16" | 0.5 mm | 0" |
| 15 | 315° | 244.4 mm | 9 5/8" | 1.6 mm | 1/16" |
| 16 | 337.5° | 261.8 mm | 10 5/16" | 2.8 mm | 1/8" |
| 17 | 360° | 279.3 mm | 11" | 3.3 mm | 1/8" |
Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.
Get it on Google Play →ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.
Get it on Google Play →