Fishmouth cut for a 12" branch (OD 323.9 mm) on a 24" header (OD 610.0 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.
Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).
| # | Angle | Around (mm) | Around (in) | Drop (mm) | Drop (in) |
|---|---|---|---|---|---|
| 1 | 0° | 0.0 mm | 0" | 46.5 mm | 1 13/16" |
| 2 | 22.5° | 63.6 mm | 2 1/2" | 40.2 mm | 1 9/16" |
| 3 | 45° | 127.2 mm | 5" | 24.2 mm | 15/16" |
| 4 | 67.5° | 190.8 mm | 7 1/2" | 7.3 mm | 5/16" |
| 5 | 90° | 254.4 mm | 10" | 0.0 mm | 0" |
| 6 | 112.5° | 318.0 mm | 12 1/2" | 7.3 mm | 5/16" |
| 7 | 135° | 381.6 mm | 15" | 24.2 mm | 15/16" |
| 8 | 157.5° | 445.2 mm | 17 1/2" | 40.2 mm | 1 9/16" |
| 9 | 180° | 508.8 mm | 20" | 46.5 mm | 1 13/16" |
| 10 | 202.5° | 572.4 mm | 22 9/16" | 40.2 mm | 1 9/16" |
| 11 | 225° | 636.0 mm | 25 1/16" | 24.2 mm | 15/16" |
| 12 | 247.5° | 699.6 mm | 27 9/16" | 7.3 mm | 5/16" |
| 13 | 270° | 763.2 mm | 30 1/16" | 0.0 mm | 0" |
| 14 | 292.5° | 826.8 mm | 32 9/16" | 7.3 mm | 5/16" |
| 15 | 315° | 890.4 mm | 35 1/16" | 24.2 mm | 15/16" |
| 16 | 337.5° | 954.0 mm | 37 9/16" | 40.2 mm | 1 9/16" |
| 17 | 360° | 1017.6 mm | 40 1/16" | 46.5 mm | 1 13/16" |
Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.
Get it on Google Play →ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.
Get it on Google Play →