1-1/2" on 24" Pipe Saddle Template

Fishmouth cut for a 1-1/2" branch (OD 48.3 mm) on a 24" header (OD 610.0 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

1.0 mmSaddle depth · 1/16"
151.7 mmWrap length · 6"
9.5 mm16-point spacing · 3/8"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"1.0 mm1/16"
222.5°9.5 mm3/8"0.8 mm1/16"
345°19.0 mm3/4"0.5 mm0"
467.5°28.5 mm1 1/8"0.1 mm0"
590°37.9 mm1 1/2"0.0 mm0"
6112.5°47.4 mm1 7/8"0.1 mm0"
7135°56.9 mm2 1/4"0.5 mm0"
8157.5°66.4 mm2 5/8"0.8 mm1/16"
9180°75.9 mm3"1.0 mm1/16"
10202.5°85.4 mm3 3/8"0.8 mm1/16"
11225°94.8 mm3 3/4"0.5 mm0"
12247.5°104.3 mm4 1/8"0.1 mm0"
13270°113.8 mm4 1/2"0.0 mm0"
14292.5°123.3 mm4 7/8"0.1 mm0"
15315°132.8 mm5 1/4"0.5 mm0"
16337.5°142.3 mm5 5/8"0.8 mm1/16"
17360°151.7 mm6"1.0 mm1/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 24"

1-1/2" branch on other headers