12" on 16" Pipe Saddle Template

Fishmouth cut for a 12" branch (OD 323.9 mm) on a 16" header (OD 406.4 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

80.5 mmSaddle depth · 3 3/16"
1017.6 mmWrap length · 40 1/16"
63.6 mm16-point spacing · 2 1/2"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"80.5 mm3 3/16"
222.5°63.6 mm2 1/2"70.8 mm2 13/16"
345°127.2 mm5"45.1 mm1 3/4"
467.5°190.8 mm7 1/2"14.8 mm9/16"
590°254.4 mm10"0.0 mm0"
6112.5°318.0 mm12 1/2"14.8 mm9/16"
7135°381.6 mm15"45.1 mm1 3/4"
8157.5°445.2 mm17 1/2"70.8 mm2 13/16"
9180°508.8 mm20"80.5 mm3 3/16"
10202.5°572.4 mm22 9/16"70.8 mm2 13/16"
11225°636.0 mm25 1/16"45.1 mm1 3/4"
12247.5°699.6 mm27 9/16"14.8 mm9/16"
13270°763.2 mm30 1/16"0.0 mm0"
14292.5°826.8 mm32 9/16"14.8 mm9/16"
15315°890.4 mm35 1/16"45.1 mm1 3/4"
16337.5°954.0 mm37 9/16"70.8 mm2 13/16"
17360°1017.6 mm40 1/16"80.5 mm3 3/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 16"

12" branch on other headers