8" on 16" Pipe Saddle Template

Fishmouth cut for a 8" branch (OD 219.1 mm) on a 16" header (OD 406.4 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

32.1 mmSaddle depth · 1 1/4"
688.3 mmWrap length · 27 1/8"
43.0 mm16-point spacing · 1 11/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"32.1 mm1 1/4"
222.5°43.0 mm1 11/16"27.7 mm1 1/16"
345°86.0 mm3 3/8"16.7 mm11/16"
467.5°129.1 mm5 1/16"5.1 mm3/16"
590°172.1 mm6 3/4"0.0 mm0"
6112.5°215.1 mm8 7/16"5.1 mm3/16"
7135°258.1 mm10 3/16"16.7 mm11/16"
8157.5°301.1 mm11 7/8"27.7 mm1 1/16"
9180°344.2 mm13 9/16"32.1 mm1 1/4"
10202.5°387.2 mm15 1/4"27.7 mm1 1/16"
11225°430.2 mm16 15/16"16.7 mm11/16"
12247.5°473.2 mm18 5/8"5.1 mm3/16"
13270°516.2 mm20 5/16"0.0 mm0"
14292.5°559.3 mm22"5.1 mm3/16"
15315°602.3 mm23 11/16"16.7 mm11/16"
16337.5°645.3 mm25 3/8"27.7 mm1 1/16"
17360°688.3 mm27 1/8"32.1 mm1 1/4"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 16"

8" branch on other headers