Fishmouth cut for a 1/2" branch (OD 21.3 mm) on a 4" header (OD 114.3 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.
Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).
| # | Angle | Around (mm) | Around (in) | Drop (mm) | Drop (in) |
|---|---|---|---|---|---|
| 1 | 0° | 0.0 mm | 0" | 1.0 mm | 1/16" |
| 2 | 22.5° | 4.2 mm | 3/16" | 0.9 mm | 1/16" |
| 3 | 45° | 8.4 mm | 5/16" | 0.5 mm | 0" |
| 4 | 67.5° | 12.5 mm | 1/2" | 0.1 mm | 0" |
| 5 | 90° | 16.7 mm | 11/16" | 0.0 mm | 0" |
| 6 | 112.5° | 20.9 mm | 13/16" | 0.1 mm | 0" |
| 7 | 135° | 25.1 mm | 1" | 0.5 mm | 0" |
| 8 | 157.5° | 29.3 mm | 1 1/8" | 0.9 mm | 1/16" |
| 9 | 180° | 33.5 mm | 1 5/16" | 1.0 mm | 1/16" |
| 10 | 202.5° | 37.6 mm | 1 1/2" | 0.9 mm | 1/16" |
| 11 | 225° | 41.8 mm | 1 5/8" | 0.5 mm | 0" |
| 12 | 247.5° | 46.0 mm | 1 13/16" | 0.1 mm | 0" |
| 13 | 270° | 50.2 mm | 2" | 0.0 mm | 0" |
| 14 | 292.5° | 54.4 mm | 2 1/8" | 0.1 mm | 0" |
| 15 | 315° | 58.6 mm | 2 5/16" | 0.5 mm | 0" |
| 16 | 337.5° | 62.7 mm | 2 1/2" | 0.9 mm | 1/16" |
| 17 | 360° | 66.9 mm | 2 5/8" | 1.0 mm | 1/16" |
Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.
Get it on Google Play →ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.
Get it on Google Play →