1/2" on 14" Pipe Saddle Template

Fishmouth cut for a 1/2" branch (OD 21.3 mm) on a 14" header (OD 355.6 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

0.3 mmSaddle depth · 0"
66.9 mmWrap length · 2 5/8"
4.2 mm16-point spacing · 3/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"0.3 mm0"
222.5°4.2 mm3/16"0.3 mm0"
345°8.4 mm5/16"0.2 mm0"
467.5°12.5 mm1/2"0.0 mm0"
590°16.7 mm11/16"0.0 mm0"
6112.5°20.9 mm13/16"0.0 mm0"
7135°25.1 mm1"0.2 mm0"
8157.5°29.3 mm1 1/8"0.3 mm0"
9180°33.5 mm1 5/16"0.3 mm0"
10202.5°37.6 mm1 1/2"0.3 mm0"
11225°41.8 mm1 5/8"0.2 mm0"
12247.5°46.0 mm1 13/16"0.0 mm0"
13270°50.2 mm2"0.0 mm0"
14292.5°54.4 mm2 1/8"0.0 mm0"
15315°58.6 mm2 5/16"0.2 mm0"
16337.5°62.7 mm2 1/2"0.3 mm0"
17360°66.9 mm2 5/8"0.3 mm0"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 14"

1/2" branch on other headers