10" on 14" Pipe Saddle Template

Fishmouth cut for a 10" branch (OD 273.1 mm) on a 14" header (OD 355.6 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

63.9 mmSaddle depth · 2 1/2"
858.0 mmWrap length · 33 3/4"
53.6 mm16-point spacing · 2 1/8"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"63.9 mm2 1/2"
222.5°53.6 mm2 1/8"56.1 mm2 3/16"
345°107.2 mm4 1/4"35.4 mm1 3/8"
467.5°160.9 mm6 5/16"11.4 mm7/16"
590°214.5 mm8 7/16"0.0 mm0"
6112.5°268.1 mm10 9/16"11.4 mm7/16"
7135°321.7 mm12 11/16"35.4 mm1 3/8"
8157.5°375.4 mm14 3/4"56.1 mm2 3/16"
9180°429.0 mm16 7/8"63.9 mm2 1/2"
10202.5°482.6 mm19"56.1 mm2 3/16"
11225°536.2 mm21 1/8"35.4 mm1 3/8"
12247.5°589.9 mm23 1/4"11.4 mm7/16"
13270°643.5 mm25 5/16"0.0 mm0"
14292.5°697.1 mm27 7/16"11.4 mm7/16"
15315°750.7 mm29 9/16"35.4 mm1 3/8"
16337.5°804.3 mm31 11/16"56.1 mm2 3/16"
17360°858.0 mm33 3/4"63.9 mm2 1/2"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 14"

10" branch on other headers