10" on 18" Pipe Saddle Template

Fishmouth cut for a 10" branch (OD 273.1 mm) on a 18" header (OD 457.0 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

45.3 mmSaddle depth · 1 13/16"
858.0 mmWrap length · 33 3/4"
53.6 mm16-point spacing · 2 1/8"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"45.3 mm1 13/16"
222.5°53.6 mm2 1/8"39.2 mm1 9/16"
345°107.2 mm4 1/4"23.9 mm15/16"
467.5°160.9 mm6 5/16"7.3 mm5/16"
590°214.5 mm8 7/16"0.0 mm0"
6112.5°268.1 mm10 9/16"7.3 mm5/16"
7135°321.7 mm12 11/16"23.9 mm15/16"
8157.5°375.4 mm14 3/4"39.2 mm1 9/16"
9180°429.0 mm16 7/8"45.3 mm1 13/16"
10202.5°482.6 mm19"39.2 mm1 9/16"
11225°536.2 mm21 1/8"23.9 mm15/16"
12247.5°589.9 mm23 1/4"7.3 mm5/16"
13270°643.5 mm25 5/16"0.0 mm0"
14292.5°697.1 mm27 7/16"7.3 mm5/16"
15315°750.7 mm29 9/16"23.9 mm15/16"
16337.5°804.3 mm31 11/16"39.2 mm1 9/16"
17360°858.0 mm33 3/4"45.3 mm1 13/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 18"

10" branch on other headers