Fishmouth cut for a 6" branch (OD 168.3 mm) on a 20" header (OD 508.0 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.
Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).
| # | Angle | Around (mm) | Around (in) | Drop (mm) | Drop (in) |
|---|---|---|---|---|---|
| 1 | 0° | 0.0 mm | 0" | 14.3 mm | 9/16" |
| 2 | 22.5° | 33.0 mm | 1 5/16" | 12.3 mm | 1/2" |
| 3 | 45° | 66.1 mm | 2 5/8" | 7.3 mm | 5/16" |
| 4 | 67.5° | 99.1 mm | 3 7/8" | 2.2 mm | 1/16" |
| 5 | 90° | 132.2 mm | 5 3/16" | 0.0 mm | 0" |
| 6 | 112.5° | 165.2 mm | 6 1/2" | 2.2 mm | 1/16" |
| 7 | 135° | 198.3 mm | 7 13/16" | 7.3 mm | 5/16" |
| 8 | 157.5° | 231.3 mm | 9 1/8" | 12.3 mm | 1/2" |
| 9 | 180° | 264.4 mm | 10 7/16" | 14.3 mm | 9/16" |
| 10 | 202.5° | 297.4 mm | 11 11/16" | 12.3 mm | 1/2" |
| 11 | 225° | 330.5 mm | 13" | 7.3 mm | 5/16" |
| 12 | 247.5° | 363.5 mm | 14 5/16" | 2.2 mm | 1/16" |
| 13 | 270° | 396.5 mm | 15 5/8" | 0.0 mm | 0" |
| 14 | 292.5° | 429.6 mm | 16 15/16" | 2.2 mm | 1/16" |
| 15 | 315° | 462.6 mm | 18 3/16" | 7.3 mm | 5/16" |
| 16 | 337.5° | 495.7 mm | 19 1/2" | 12.3 mm | 1/2" |
| 17 | 360° | 528.7 mm | 20 13/16" | 14.3 mm | 9/16" |
Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.
Get it on Google Play →ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.
Get it on Google Play →