6" on 6" Pipe Saddle Template

Fishmouth cut for a 6" branch (OD 168.3 mm) on a 6" header (OD 168.3 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

84.2 mmSaddle depth · 3 5/16"
528.7 mmWrap length · 20 13/16"
33.0 mm16-point spacing · 1 5/16"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"84.2 mm3 5/16"
222.5°33.0 mm1 5/16"77.7 mm3 1/16"
345°66.1 mm2 5/8"59.5 mm2 5/16"
467.5°99.1 mm3 7/8"32.2 mm1 1/4"
590°132.2 mm5 3/16"0.0 mm0"
6112.5°165.2 mm6 1/2"32.2 mm1 1/4"
7135°198.3 mm7 13/16"59.5 mm2 5/16"
8157.5°231.3 mm9 1/8"77.7 mm3 1/16"
9180°264.4 mm10 7/16"84.2 mm3 5/16"
10202.5°297.4 mm11 11/16"77.7 mm3 1/16"
11225°330.5 mm13"59.5 mm2 5/16"
12247.5°363.5 mm14 5/16"32.2 mm1 1/4"
13270°396.5 mm15 5/8"0.0 mm0"
14292.5°429.6 mm16 15/16"32.2 mm1 1/4"
15315°462.6 mm18 3/16"59.5 mm2 5/16"
16337.5°495.7 mm19 1/2"77.7 mm3 1/16"
17360°528.7 mm20 13/16"84.2 mm3 5/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 6"

6" branch on other headers