1" on 10" Pipe Saddle Template

Fishmouth cut for a 1" branch (OD 33.4 mm) on a 10" header (OD 273.1 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

1.0 mmSaddle depth · 1/16"
104.9 mmWrap length · 4 1/8"
6.6 mm16-point spacing · 1/4"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"1.0 mm1/16"
222.5°6.6 mm1/4"0.9 mm1/16"
345°13.1 mm1/2"0.5 mm0"
467.5°19.7 mm3/4"0.2 mm0"
590°26.2 mm1 1/16"0.0 mm0"
6112.5°32.8 mm1 5/16"0.2 mm0"
7135°39.3 mm1 9/16"0.5 mm0"
8157.5°45.9 mm1 13/16"0.9 mm1/16"
9180°52.5 mm2 1/16"1.0 mm1/16"
10202.5°59.0 mm2 5/16"0.9 mm1/16"
11225°65.6 mm2 9/16"0.5 mm0"
12247.5°72.1 mm2 13/16"0.2 mm0"
13270°78.7 mm3 1/8"0.0 mm0"
14292.5°85.3 mm3 3/8"0.2 mm0"
15315°91.8 mm3 5/8"0.5 mm0"
16337.5°98.4 mm3 7/8"0.9 mm1/16"
17360°104.9 mm4 1/8"1.0 mm1/16"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 10"

1" branch on other headers