4" on 10" Pipe Saddle Template

Fishmouth cut for a 4" branch (OD 114.3 mm) on a 10" header (OD 273.1 mm) at 90°. Print the full-size template, wrap it on the branch and cut — or lay it out by hand with the table below.

12.5 mmSaddle depth · 1/2"
359.1 mmWrap length · 14 1/8"
22.4 mm16-point spacing · 7/8"

Download the full-size PDF →

16-point layout table

Divide the branch circumference into 16 equal parts starting at a RUN AXIS line (0°). At each point, measure the drop from the horn tip line. 90° and 270° are the horns (sides of the header); 0° and 180° are the crotch (along the header).

#AngleAround (mm)Around (in)Drop (mm)Drop (in)
10°0.0 mm0"12.5 mm1/2"
222.5°22.4 mm7/8"10.8 mm7/16"
345°44.9 mm1 3/4"6.4 mm1/4"
467.5°67.3 mm2 5/8"1.9 mm1/16"
590°89.8 mm3 9/16"0.0 mm0"
6112.5°112.2 mm4 7/16"1.9 mm1/16"
7135°134.7 mm5 5/16"6.4 mm1/4"
8157.5°157.1 mm6 3/16"10.8 mm7/16"
9180°179.5 mm7 1/16"12.5 mm1/2"
10202.5°202.0 mm7 15/16"10.8 mm7/16"
11225°224.4 mm8 13/16"6.4 mm1/4"
12247.5°246.9 mm9 3/4"1.9 mm1/16"
13270°269.3 mm10 5/8"0.0 mm0"
14292.5°291.8 mm11 1/2"1.9 mm1/16"
15315°314.2 mm12 3/8"6.4 mm1/4"
16337.5°336.6 mm13 1/4"10.8 mm7/16"
17360°359.1 mm14 1/8"12.5 mm1/2"

Dummy Support Calculator

Elbow trunnions, beam dummies, elbow miter cuts and dummy-leg cut lengths from center height. Android, made by a working pipefitter.

Get it on Google Play →

Pipe ISO Calculator

ISO sketch to CL/CUT cut list, 2D offsets, parallel runs and elbow miter — with PDF/DXF export.

Get it on Google Play →

Other branch sizes on 10"

4" branch on other headers